SME070 – Manual tool change
Applications
Electrospindle with manual tool change, projected to work wood, aluminium, and plastic materials. Well protected to work in environments with wood dust and aluminium or plastic chippings.
Suitable for light drilling and milling operations.
Available in many combinations of power and torque to satisfy any customers requirements. Cooled by low noise direct fan.
Layout
Performance
TECHNICAL DATA
| wdt_ID | Column 1 | Column 2 | Column 3 |
|---|---|---|---|
| 1 | Main housing type/dimensions | extruded body | 66 x 70 mm |
| 2 | Power S1/Rated speed | kW/rpm*1000 | 0,8 / 12 Fig.1 |
| 3 | 1 / 12 Fig.2 | ||
| 4 | 1/18 Fig.3 | ||
| 5 | Torque S1 | Nm | see chart |
| 6 | Maximum frequency | Hz | 400 |
| 7 | Motor poles | n° | 2 |
| 8 | Max. speed | rpm | 24000 |
| 9 | Tool Clamping | manual | |
| 10 | Tool Unlocking | no | |
| 11 | Cylinder return | no | |
| 12 | Front Bearings | 18000 steel / 24000 ceramic | |
| 13 | Rear Bearings | steel | |
| 14 | Bearings lubrication | for life | |
| 15 | Nominal tension | Volts | 380 |
| 16 | Cooling system | direct fan |