SAE145 – Electrospindle ATC | AIR COOLED
Applications
Electrospindle projected to work wood, aluminium, and plastic materials. Well protected to work in environments with wood dust and aluminium or plastic chippings.
Suitable for light drilling and milling operations.
Available in many combinations of power and torque to satisfy any customers requirements. Cooled by low noise direct fan.
Layout
Performance
TECHNICAL DATA
| wdt_ID | Column 1 | Column 2 | Column 3 |
|---|---|---|---|
| 1 | Base Dimension | extruded body | 145 x 145 mm |
| 2 | Power S1/Speed | kW/rpm*1000 | 8/12 Fig.1 |
| 3 | 10/12 Fig.2 | ||
| 4 | 11/12 Fig.3 | ||
| 7 | Tool taper | ISO30 | |
| 8 | HSK F63 | ||
| 9 | Nose | LN-Long nose | |
| 10 | SN-Short nose | ||
| 11 | Torque S1 | Nm | See Chart |
| 12 | Maximum frequency | Hz | 800 |
| 13 | Motor poles | n° | 4 |
| 14 | Max. speed | rpm | 24000 |
| 15 | Tool Clamping | Springs | |
| 16 | Tool Unlocking | pneumatic (min. 3 bar) | |
| 17 | Cylinder return | Spring | |
| 18 | Front Bearings | ceramics | |
| 19 | Rear Bearings | 18000 steel / 24000 ceramic | |
| 20 | Bearings lubrication | for life | |
| 21 | Nominal tension | Volts | 220/380 |
| 22 | Cooling system | electric fan 24 Volts | |
| 23 | Electric Board 4.0 | Base | Digital |
| 24 | Available protocols | can bus - can open - ethercat - I/o link - - etc… | |
| 25 | Encoder LB -1Vpp o TTL | opt | |
| 26 | Vibration Sensor | opt | |
| 27 | Bearing Temperature Sensor | opt |