SAB150 – Automatic tool change asynchronous motor short nose
Applications
Electrospindle specifically projected for 2 axis milling heads with 90-degree axis.
This version combines high performances in a very small housing.
Available short and long nose, asynchronous and synchronous versions, to satisfy any customers requirements.
High reliability in hard milling thanks to liquid cooled system.
Layout
Performance
TECHNICAL DATA
| wdt_ID | Column 1 | Column 2 | Column 3 |
|---|---|---|---|
| 1 | Base Dimension | Block | 150 x 150 mm |
| 2 | Power S1/Speed | kW/rpm*1000 | 13,5/12 Fig.1 |
| 3 | 15 / 12 Fig.2 | ||
| 4 | 15 / 15 Fig.3 | ||
| 8 | Tool taper | HSK F63 | |
| 9 | Torque S1 | Nm | see chart |
| 10 | Maximum frequency | Hz | 800 |
| 11 | Motor poles | n° | 4 |
| 12 | Max. speed | rpm | 24000 |
| 13 | Tool Clamping | springs | |
| 14 | Tool Unlocking | pneumatic (min. 3 bar) | |
| 15 | Cylinder return | Spring | |
| 16 | Front Bearings | ceramics | |
| 17 | Rear Bearings | 18000 steel / 24000 ceramic | |
| 18 | Bearings lubrication | for life | |
| 19 | Nominal tension | Volts | 380 |
| 20 | Cooling system | liquid | |
| 21 | Electric Board 4.0 | Base | digital |
| 22 | available protocols | can bus - can open - ethercat - I/o link - - etc… | |
| 23 | Encoder LB -1Vpp o TTL | opt |