LIQUID COOLED
ASYNCHRONOUS MOTOR
SHORT NOSE
SAB150 - Automatic tool change
| wdt_ID | Column 1 | Column 2 | Column 3 |
|---|---|---|---|
| 1 | Base Dimension | Block | 150 x 150 mm |
| 2 | Power S1/Speed | kW/rpm*1000 | 10/7,5 Fig.1 |
| 3 | 8 / 4,5 Fig.2 | ||
| 4 | 7 / 4,5 Fig.3 | ||
| 8 | Tool taper | HSK F63 | |
| 9 | Torque S1 | Nm | see chart |
| 10 | Maximum frequency | Hz | 800 |
| 11 | Motor poles | n° | 4 |
| 12 | Max. speed | rpm | 24000 |
| 13 | Tool Clamping | springs | |
| 14 | Tool Unlocking | pneumatic (min. 3 bar) | |
| 15 | Cylinder return | Spring | |
| 16 | Front Bearings | ceramics | |
| 17 | Rear Bearings | 18000 steel / 24000 ceramic | |
| 18 | Bearings lubrication | for life | |
| 19 | Nominal tension | Volts | 380 |
| 20 | Cooling system | liquid | |
| 21 | Electric Board 4.0 | Base | digital |
| 22 | available protocols | can bus - can open - ethercat - I/o link - - etc… | |
| 23 | Encoder LB -1Vpp o TTL | opt |