SAB132 – Automatic tool change Synchronous
electrospindle specifically projected for 2 axis milling heads with 50-degree axis. This version combines high performances in a very small housing
Available Asynchronous and Synchronous versions, both with 4 or 6 poles, to satisfy any customers requirements.
High reliability in hard milling thanks to liquid cooled system.
Layout
Performance
TECHNICAL DATA
| wdt_ID | Column 1 | Column 2 | Column 3 |
|---|---|---|---|
| 1 | Base Dimension | 176 x 132 mm | |
| 2 | Power S1/Speed | kW/rpm*1000 | 16/8/6 fig. 1 |
| 3 | 15/12/4 fig. 2 | ||
| 9 | Tool taper | HSKf63 | |
| 10 | Torque S1 | Nm | see chart |
| 11 | Maximum frequency | Hz | 1200 / 800 |
| 12 | Motor poles | n° | 6 / 4 |
| 13 | Max. speed | rpm | 24000 |
| 14 | Tool Clamping | springs | |
| 15 | Tool Unlocking | pneumatic (min. 3 bar) | |
| 16 | Cylinder return | Spring | |
| 17 | Front Bearings | ceramics | |
| 18 | Rear Bearings | 18000 steel / 24000 ceramic | |
| 19 | Bearings lubrication | for life | |
| 20 | Nominal tension | Volts | 380 |
| 21 | Cooling system | liquid | |
| 22 | Encoder -1Vpp o TTL | opt |